User Manual

2. Click
on the toolbar to enable two-way audio funcon of the camera.
3. Click , disable the two-way audio funcon.
4.6 Display Sengs
It oers the parameter sengs to adjust image features.
Go to Conguraon → Image → Display Sengs .
Click Default to restore sengs.
4.6.1 Scene Mode
There are several sets of image parameters predened for dierent installaon environments.
Select a scene according to the actual installaon environment to speed up the display sengs.
Image Adjustment
By adjusng the Brightness, Saturaon, Hue, Contrast and Sharpness, the image can be best
displayed.
Exposure
Sengs
Exposure is controlled by the combinaon of iris, shuer, and photo sensibility. You can adjust
image
eect by seng exposure parameters.
In manual mode, you need to set Exposure Time, Gain and Slow Shuer.
Focus
It oers opons to adjust the focus mode.
Focus Mode
Auto
The device focuses automacally as the scene changes. If you cannot get a well-focused
image under auto mode, reduce light sources in the image and avoid
ashing lights.
Semi-auto
The device focuses once aer the PTZ and lens zooming. If the image is clear, the focus does
not change when the scene changes.
Manual
You can adjust the focus manually on the live view page.
Network Camera User Manual
20