User Manual

Steps
1. Go to
Conguraon → Road Trac → Detecon Conguraon , and select Mixed-trac
Detecon as detecon type.
2. Check Enable.
3.
Select the lane number.
4. Select Region and Country/Region.
5. Set arming schedule and linkage method. For the arming schedule
sengs, refer to Set Arming
Schedule . For the linkage method sengs, refer to Linkage Method Sengs .
6. Click Save.
10.1.3 Uploading Pictures Sengs
You can set the image parameters of the captured images in vehicle detecon and mixed-trac
detecon.
Go to Conguraon → Road Trac → Picture .
Picture Quality
The larger the value is, the clearer the picture is, but larger storage space is also required.
Picture Size
The larger the value is, the larger the storage space is needed. And the level of network
transmission requirement is also higher.
License Plate Enhancement
The larger the value is, the clearer the license plate is, but larger storage space is also required.
Check License Plate Enhancement and set the level. The default level is 50.
Overlay
You can overlay camera, device or vehicle
informaon on the captured image and click to
adjust the order of overlay texts.
For camera
sengs, go to Conguraon → Road Trac → Camera to set relevant parameters
and click Save.
10.1.4 Camera
Sengs
You can set the parameters of each camera for beer management.
Go to
Conguraon → Road Trac → Camera to set relevant parameters and click Save.
10.1.5 Import or Export Blocklist & Allowlist
You can import and export the blocklist and allowlist as desired, and check the list content in this
interface.
Network Camera User Manual
88