Quick Start Guide

Network Bullet Camera·Quick Start Guide
18
18
Steps:
1. Drill 4 screw holes (hole 1 on drill template) and the cable hole in
the ceiling/wall.
Ceiling Mounting
1
1:Screw Hole for
Bracket
2:Screw Hole for
Mounting Base
1
1
1
2 2
2
2
Cable Hole
Figure 2-3 Drill Template
2. Fix the camera to the wall/ceiling with the supplied screws.
Note:
Please insert the expansion screws first if the camera is mounted to
the cement wall/ceiling. And you can use the self-tapping screws
directly if the camera is mounted to the wooden wall/ceiling.
Wall
Ceiling
Figure 2-4 Install the Camera