User Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Wi-Fi Settings
- Chapter 5 Live View
- Chapter 6 Network Camera Configuration- 6.1 Configuring Local Parameters
- 6.2 Configuring Time Settings
- 6.3 Configuring Network Settings- 6.3.1 Configuring TCP/IP Settings
- 6.3.2 Configuring Port Settings
- 6.3.3 Configuring PPPoE Settings
- 6.3.4 Configuring DDNS Settings
- 6.3.5 Configuring SNMP Settings
- 6.3.6 Configuring 802.1X Settings
- 6.3.7 Configuring QoS Settings
- 6.3.8 Configuring UPnP™ Settings
- 6.3.9 Configuring Wireless Dial Settings
- 6.3.10 Email Sending Triggered by Alarm
- 6.3.11 Configuring NAT (Network Address Translation) Settings
- 6.3.12 Configuring FTP Settings
- 6.3.13 Platform Access
- 6.3.14 HTTPS Settings
 
- 6.4 Configuring Video and Audio Settings
- 6.5 Configuring Image Parameters
- 6.6 Configuring and Handling Alarms- 6.6.1 Configuring Motion Detection
- 6.6.2 Configuring Video Tampering Alarm
- 6.6.3 Configuring Alarm Input
- 6.6.4 Configuring Alarm Output
- 6.6.5 Handling Exception
- 6.6.6 Configuring Other Alarm
- 6.6.7 Configuring Audio Exception Detection
- 6.6.8 Configuring Defocus Detection
- 6.6.9 Configuring Scene Change Detection
- 6.6.10 Configuring Face Detection
- 6.6.11 Configuring Line Crossing Detection
- 6.6.12 Configuring Intrusion Detection
- 6.6.13 Configuring Region Entrance Detection
- 6.6.14 Configuring Region Exiting Detection
- 6.6.15 Configuring Unattended Baggage Detection
- 6.6.16 Configuring Object Removal Detection
 
- 6.7 VCA Configuration
 
- Chapter 7 Storage Settings
- Chapter 8 Counting
- Chapter 9 Road Traffic
- Chapter 10 Playback
- Chapter 11 Log Searching
- Chapter 12 Others
- Appendix
User Manual of Network Camera 
5 
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. 
Safety Instruction 
These instructions are intended to ensure that the user can use the product correctly to 
avoid danger or property loss.   
The precaution measure is divided into ‘Warnings’ and ‘Cautions’: 
Warnings:  Serious  injury  or  death  may  be  caused  if  any  of  these  warnings  are 
neglected. 
Cautions: Injury or equipment damage may be caused if any of these cautions are 
neglected. 
Warnings  Follow  these  safeguards  to 
prevent serious injury or death. 
Cautions  Follow  these  precautions  to 
prevent  potential  injury  or  material 
damage.     
Warnings: 
  Please  adopt  the  power  adapter  which  can  meet  the  safety  extra  low  voltage 
(SELV) standard. And source with 12 VDC or 24 VAC (depending on  models) 
according to the IEC60950-1 and Limited Power Source standard. 
  To reduce the risk of fire or electrical shock, do not expose this product to rain or 
moisture. 
  This installation should be made by a qualified service person and should conform 
to all the local codes. 
  Please install blackouts equipment  into the power supply circuit for convenient 
supply interruption.   
  Please make sure that the ceiling can support more than 50(N) Newton gravities if 
the camera is fixed to the ceiling. 
  If the product does not work properly, please contact your dealer or the nearest 
service center. Never attempt to disassemble the camera yourself. (We shall not 
assume  any  responsibility  for  problems  caused  by  unauthorized  repair  or 
maintenance.) 










