Quick Start Guide

Network Mini Camera·Quick Start Guide
7
7
● Make sure that the plug is firmly connected to the power socket.
When the product is mounted on wall or ceiling, the device
shall be firmly fixed.
● If smoke, odor or noise rise from the device, turn off the power
at once and unplug the power cable, and contact the service
center.
Cautions
● If the camera fails to synchronize the local time with that of the
network, you need to set up the camera time manually. Visit
the camera (via the web browser or client software) and enter
the system settings interface for the time settings.
● Make sure the power supply voltage is correct before using the
camera.
● Do not drop the camera or subject it to physical shock.
● Do not touch sensor modules with fingers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
replace the lens cap to protect the sensor from dirt.
● Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a
malfunction), and affect the endurance of sensor at the same
time.
● The sensor may be burned out by a laser beam, so when any
laser equipment is in using, make sure that the surface of
sensor will not be exposed to the laser beam.