User Manual

User Manual of Network Fisheye Camera
88
Please refer to the actual interface for details.
Day/Night Scheduled Switch
Day/Night scheduled-switch configuration interface enables you to set the camera
parameters for day and night separately, guaranteeing the image quality in
different illumination.
Figure 6-43 Day/Night Scheduled-Switch Setting
Steps:
1. Click the calendar icon to select the start time and the end time of the switch.
Notes:
• The start time and end time refer to the valid time for day mode.
• The time period can start and end on two days in a row. For example, if
you set start time as 10:00 and end time as 1:00, the day mode will be
activated at 10 o'clock in the morning and stopped at 1 o'clock early in
the next morning.
2. Click Common tab to configure the common parameters applicable to the
day mode and night mode.
Note: For the detailed information of each parameter, please refer to
Day/Night Auto-Switch in Section 6.5.1.
3. Click Day tab to configure the parameters applicable for day mode.
4. Click Night tab to configure the parameters applicable for night mode.