User Manual

User Manual of Network Fisheye Camera
86
Iris Mode: If the camera is equipped with the fixed lens, only Manual is
selectable, and the iris mode is not configurable.
Exposure Time: It refers to the electronic shutter time, which ranges from
1/3 to 1/100,000s. Adjust it according to the actual luminance condition.
Gain: Gain of the image can also be manually configured from 0 to 100. The
bigger the value is, the brighter would the image be, and the noise would also
be amplified to a larger extent.
 Day/Night Switch
Select the day/night switch mode, and configure the smart supplement light
settings from this option.
Day: the camera stays at day mode.
Night: the camera stays at night mode.
Auto: the camera switches between the day mode and the night mode
according to the illumination automatically. The sensitivity ranges from 0 to
7, the higher the value is, the easier the mode switches. The Filtering Time
refers to the time interval between the day/night switch. You can set it from
5s to 120s.
Scheduled-Switch: The camera switches between the day mode and the
night mode according to the configured time period.
Triggered by Alarm Input: The camera switches to the day mode or the
night mode after the alarm is triggered.
Smart Supplement Light (Smart IR): Smart Supplement Light function
gives user an option to adjust the power of the IR LED, thus avoiding image
over-exposure.
When the light is turned on, and Auto and Manual are selectable for IR mode.
Select AUTO, and the IR LED changes according to the actual luminance.
E.g., if the current scene is bright enough, then the IR LED adjusts itself to
lower power; and if the scene is not bright enough, the IR LED adjusts itself
to higher power.