User Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Wi-Fi Settings
- Chapter 5 Live View
- Chapter 6 Network Camera Configuration
- 6.1 Configuring Local Parameters
- 6.2 Configuring System Settings
- 6.3 Configuring Network Settings
- 6.3.1 Configuring TCP/IP Settings
- 6.3.2 Configuring Port Settings
- 6.3.3 Configuring PPPoE Settings
- 6.3.4 Configuring DDNS Settings
- 6.3.5 Configuring NAT (Network Address Translation) Settings
- 6.3.6 Configuring SNMP Settings
- 6.3.7 Configuring FTP Settings
- 6.3.8 Email Settings
- 6.3.9 Configuring HTTPS Settings
- 6.3.10 Configuring QoS Settings
- 6.3.11 Configuring 802.1X Settings
- 6.3.12 Configuring Platform Access
- 6.4 Configuring Video and Audio Settings
- 6.5 Configuring Image Parameters
- 6.6 Configuring Event Settings
- Chapter 7 Storage Settings
- Chapter 8 Playback
- Chapter 9 Picture
- Appendix
User Manual of Network Fisheye Camera
33
Table 5-2 Description of Display Modes
Mode
Description
Mode
Description
Fisheye view.
180 degrees panorama view.
360 degrees panorama view.
Live view with a 360 degrees
panorama view and a PTZ view.
Live view with a 360 degrees
panorama view and 3 PTZ views.
Live view with a 360 degrees
panorama view and 6 PTZ
views.
Live view with a 360 degrees
panorama view and 8 PTZ views.
Live view with 2 PTZ views.
Live view with into 4 PTZ views.
Live view with 1 fisheye view
and 3 PTZ views.
Live view with 1 fisheye view
and 8 PTZ views.
Panorama view.
Live view with a panorama view
and 3 PTZ views.
Live view with a panorama
view and 3 PTZ views.
Note: Available display modes vary according to camera models.
Live View Window:
Display the live video on the display window of live view.
Toolbar:
Start/Stop the live view, enable/disable the two-way audio, adjust the audio volume,
capture pictures, record the video files, etc..
PTZ Control:
Realize the pan/tilt/zoom function of PTZ view via the navigation box, and set the
PTZ moving speed.
Preset/Patrol Settings:
Set and call the preset/patrol for the camera.