User Manual

Performance Mode
The device works with all the funcons enabled.
Proacve Mode
The device DSP works normally. It records the videos with the main stream at the half frame
rate, and supports the remote login, preview and the
conguraon.
Low Power Sleep
When the device power is lower than Threshold of Low Power Sleep Mode, the device enters
sleep mode.
When the device power is recovered to 10% above the threshold, the device enters the user
conguraon mode.
Scheduled Sleep
If the device is during Scheduled Sleep Time, it enters the sleep mode, otherwise it enters the
user conguraon mode.
Note
For the scheduled sleep schedule sengs, see Set Arming Schedule .
The device supports the ming wake. For the details, see Set Timing Wake .
2.11.17 External Device
For the device supporng external devices, including the supplement light, wiper on the housing,
the LED light, and heater, you can control them via the Web browser when it is used with the
housing. External devices vary with models.
Supplement Light
Sengs
You can set supplement light and refer to the actual device for relevant parameters.
Smart Supplement Light
Smart supplement light avoids over exposure when the supplement light is on.
Supplement Light Mode
When the device supports supplement light, you can select supplement light mode.
IR Mode
IR light is enabled.
White Light Mode
White light is enabled.
Mix Mode
Both IR light and white light are enabled.
Network Camera User Manual
82