User Manual

Warning
Aer enabling auto maintenance, the device will automacally restart according to the
maintenance plan. The device cannot record video during the restarng process.
2.11.10 View Open Source Soware License
Go to Conguraon → System → System Sengs → About Device , and click View Licenses.
2.11.11 Wiegand
Note
This funcon is only supported by certain camera models.
Check Enable and select the protocol. The default protocol is SHA-1 26bit.
If enabled, the recognized license plate number will be output via the selected Wiegand protocol.
2.11.12 Metadata
Metadata is the raw data that the camera collects before algorithm processing. It provide the
opon to users to explore various data usages.
Note
The funcon is only supported by certain device models.
Go to Conguraon → System → Metadata Sengs to enable metadata uploading of the desired
funcon.
Smart Event
The metadata of the smart event includes the target ID, target coordinate, me, etc.
2.11.13 Time and Date
You can congure me and date of the device by conguring me zone, me synchronizaon and
Daylight Saving Time (DST).
Synchronize Time Manually
Steps
1.
Go to Conguraon → System → System Sengs → Time Sengs .
2.
Select Time Zone.
Network Camera User Manual
79