User Manual

Set Face Detecon
It helps to detect the face in the detecon region. If a face is detected, the device triggers the
linkage
acons.
Steps
1.
Go to Conguraon → Event → Smart Event → Face Detecon .
2.
Check Enable Face Detecon.
3.
Oponal: Highlight to display the face in the image.
1) Check Enable Dynamic Analysis For Face Detecon.
2) Go to Conguraon → Local , set Rules to Enable.
4.
Set
Sensivity. The lower the sensivity is, the prole of the face or unclear face is more dicult
to detect.
5.
Set the arming schedule and linkage methods. For the informaon about arming schedule
sengs, see Set Arming Schedule . For the informaon about linkage methods, see Linkage
Method Sengs .
6.
Click Save.
Set Video Loss
This funcon can detect the video signal loss in me and trigger the linkage acon.
Steps
1.
Go to Conguraon → Event → Basic Event → Video Loss .
2.
Check Enable.
3.
Refer to
Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
4.
Click Save.
Set Intrusion
Detecon
It is used to detect objects entering and loitering in a predened virtual region. If it occurs, the
device can take linkage acons.
Before You Start
●
Go to VCA → VCA Resource , and select Smart Event.
●
For the device
supporng HEOP, go to VCA → APP to import and enable Smart Event.
Steps
1.
Go to VCA → Smart Event → Intrusion Detecon .
2.
Check Enable.
3.
Select a Region. For the
detecon region sengs, refer to Draw Area .
Network Camera User Manual
53