User Manual

Status of the device becomes Acve aer successful acvaon.
5.
Modify IP address of the device.
1) Select the device.
2) Change the device IP address to the same subnet as your computer by either modifying the IP
address manually or checking Enable DHCP.
3) Input the admin password and click Modify to
acvate your IP address modicaon.
1.1.2
Acvate Camera via iVMS-4200
iVMS-4200 is a PC client to manage and operate your devices. Camera acvaon is supported by
the
soware.
Before You Start
●
Get the client soware from the supplied disk or the ocial website hp://
www.hikvision.com/en/ . Install the soware following the prompts.
●
The camera and the PC that runs the
soware should be in the same subnet.
Steps
1.
Run the client soware.
2.
Enter Device Management or Online Device.
3.
Check the device status from the device list, and select an
inacve camera.
4.
Click the Acvate.
5.
Create and
conrm the admin password of the camera.
Network Camera User Manual
2