User Manual

3. Click Manual Time Sync..
4. Choose one
me synchronizaon method.
-
Select Set Time, and manually input or select date and me from the pop-up calendar.
-
Check Sync. with computer me to synchronize the me of the device with that of the local
PC.
5. Click Save.
9.12.2 Set NTP Server
You can use NTP server when accurate and reliable
me source is required.
Before You Start
Set up a NTP server or obtain NTP server
informaon.
Steps
1. Go to Conguraon → System → System Sengs → Time Sengs .
2. Select Time Zone.
3. Click NTP.
4. Set Server Address, NTP Port and Interval.
Note
Server Address is NTP server IP address.
5. Click Test to test server connecon.
6. Click Save.
9.12.3 Synchronize Time by Satellite
Note
This funcon varies depending on dierent devices.
Steps
1. Enter Conguraon → System → System Sengs → Time Sengs .
2. Select Satellite Time Sync..
3. Set Interval.
4. Click Save.
9.12.4 Set DST
If the region where the device is located adopts Daylight Saving Time (DST), you can set this
funcon.
Steps
1. Go to
Conguraon → System → System Sengs → DST .
Network Camera User Manual
75