Quick Start Guide

Network Cube Camera·Quick Start Guide
16
16
No.
Description
3
1 RJ45 10M/100M self-adaptive Ethernet port & PoE
4
Power Interface (12 VDC)
5
Speaker
6
Microphone
7
Lens
8
Indicator
● Solid red: the camera is starting
● Solid blue: the camera is connected
to the network successfully and
works properly
● Flashing red: the network is
abnormal
● Flashing blue: the camera starts
successfully and is communicating
9
PIR(Passive Infrared) sensor
10
IR LED
Note:
 Press RESET about 10s when the camera is power on or
rebooting to restore the default settings, including the user
name, password, IP address, port No., etc.
 A wireless router with the WPS function is required to enable
the WPS function of the camera. Refer the steps below.