Quick Start Guide

Network Turret Camera·Quick Start Guide
32
32
2.2.1 Wall Mounting
The wall mount is not included in the package. You need to prepare
one, if you adopt this mounting type.
Steps:
Mark the screw holes on desired mounting place. 1.
Figure 2-30 Dimension of Demonstrated Wall Mounting Bracket
Drill four screw holes with a Φ10 mm drill. 2.
Route the cables and fix the bracket with four M6 expansion 3.
bolts.
Disassemble the camera. 4.
Refer to step 1 in ceiling mounting of each camera type.
Fix the mounting base to the cap of wall mount with 3 supplied 5.
self-tapping screws.