Quick Start Guide

Network Turret Camera·Quick Start Guide
23
23
Connect the corresponding power/network cable. 4.
Install the camera along with the enclosure to the mounting 5.
base by anticlockwise rotating the camera.
Rotate the enclosure to adjust the pan angle; rotate the camera 6.
to adjust the tilt angle.
P Direction
360
o
R Direction
360
o
T Direction
0
o~
75
o
Adjust the Lens Figure 2-13
Attach the trim ring to the camera and rotate the trim ring 7.
clockwise to get it secured.
Trim Ring
Install the Trim Ring Figure 2-14