Manualshelf

Quick Start Guide

ManualsBrandsHikvision ManualsSecurity CamerasDS-2CD2343G0-I 4MP Outdoor Network Turret Camera with Night Vision & 2.8mm Lens
31323334353637383940
QSG DS-2CD23xxxx-xx Turret 051420NA 39
5.4 Initializing the Memory Card
1.
Check the memory card status by tapping on Storage Status in the Device Settings interface.
2.
If the memory card status displays as Uninitialized, tap to initialize it. The status will then
change to Normal. You can then start recording any event triggered video in the camera such
as motion detection.
NOTE: Initializing a memory card will erase all data from it.