Quick Start Guide

QSG DS-2CD23xxxx-xx Turret 051420NA 37
NOTE: The verification code is required when you add the camera to the Hik-Connect app.
3. Click and read the “Terms of Service” and “Privacy Policy.”
4. Confirm the settings.
Enable Hik-Connect Service via Web Browser
Before You Start
Activate the camera before enabling the service. Refer to Chapter 3.2.
1. Access the camera via a Web browser. Refer to Chapter 4.
Figure 52, Platform Access Configuration (Web)
2. Enter platform access configuration interface: Configuration > Network > Advanced
Settings > Platform Access.
3. Select Hik-Connect as the Platform Access Mode.
4. Check the Enable checkbox.
5. Click and read “Terms of Service” and “Privacy Policy” in the pop-up window.
6. Create or change the camera verification code.
NOTE: The verification code is required when you add the camera to the Hik-Connect app.
7. Save the settings.
5.2 Hik-Connect Setup
1. Download and install the Hik-Connect app by searching for “Hik-Connect” in the App Store or
Google Play

.
2. Launch the app and register for a Hik-Connect user account.
3. Log in to the Hik-Connect app after registration.