Quick Start Guide

QSG DS-2CD23xxxx-xx Turret 051420NA 36
Figure 50, Download Plug-in
6. Re-open the Web browser after the plug-in installation, and repeat steps 2 to 4 to login.
NOTE: For detailed configuration instructions, refer to the network camera user manual.
5 Operating via the Hik-Connect App
Purpose
Hik-Connect is a mobile device application. With the Hik-Connect app, you can view a live image of the
camera, receive alarm notifications, etc.
NOTE: Hik-Connect service is not supported by certain camera models.
5.1 Enable Hik-Connect Service on Camera
Purpose
Enable Hik-Connect service on your camera before using the service. You can enable the service
through SADP software or a Web browser.
Enable Hik-Connect Service via SADP Software
1. Check the Enable Hik-Connect checkbox on one of the following locations:
• “Activate the Device” page during camera activation, refer to Chapter 3.2.
• “Modify Network Parameters” page during modifying IP address, refer to Chapter 3.3.
2. Create a verification code or change the verification code.
Figure 51, Verification Code Setting (SADP)