Quick Start Guide

QSG DS-2CD23xxxx-xx Turret 051420NA 24
Wall Mounting
A wall mount is not included in the package. You must purchase one separately if you use
this mounting method.
1. Mark the screw holes on the desired mounting location.
Figure 34, Dimensions of Typical Wall Mounting Bracket
2. Drill four screw holes with a Ø10 mm drill.
3. Route the cables and fix the bracket with four M6 expansion bolts.
4. Disassemble the camera.
NOTE: Refer to step 1 in the specifc camera type’s ceiling mounting section.
5. Fix the mounting base to the wall mount cap with three supplied self-tapping screws.