Quick Start Guide

QSG DS-2CD23xxxx-xx Turret 051420NA 20
Figure 24, Install the Camera
7. Rotate the enclosure to adjust the pan angle; rotate the camera to adjust the tilt
angle.
Figure 25, Adjust the Lens
8. Attach the trim ring to the camera, and rotate the trim ring clockwise to secure it.
Figure 26, Install the Trim Ring
Type IV
1. Disassemble the camera.
1). Rotate the trim ring counterclockwise to take it off of the camera.
2). Loosen the fixing screw. Take the mounting base off of the camera and enclosure.