Quick Start Guide

QSG DS-2CD23xxxx-xx Turret 051420NA 10
1.4 Type IV
Figure 4, Type IV Turret Camera
Table 1-4 Description
No.
Description
No.
Description
1
Trim Ring
5
Power
Cord
2
Enclosure
6
10M/100M
S
elf
-
A
daptive Ethernet
I
nterface (PoE)
3
Mounting Base
7
RST (Reset) Button
4
Camera
8
Memory Card Slot
NOTES: For type IV cameras, the memory card slot and reset button locations may differ by
model.
Press the Reset button for approximately 10s when the camera is powering on or
rebooting to restore the default settings, including the user name, password, IP
address, port no., etc.
2 Installation
Before You Start
• Make sure the device in the package is in good condition and all the assembly parts are included.
• The standard power supply is 12 VDC, please make sure your power supply matches your camera.
• Make sure all the related equipment is powered off during the installation.
• Check the product specification for the installation environment.