User Manual

User Manual of Network Camera

Triggered by alarm input: The switch is triggered by alarm input, and you can set

the triggered mode to day or night.

Smart IR: Smart IR function gives user an option to adjust the power of the IR LED,

thus providing a clear image that is not overexposed or too dark. Select ON to enable

the smart IR, and then Auto and Manual are selectable for IR mode.

Select AUTO, and the power of IR LED changes automatically according to the actual

luminance. E.g.: if the current scene is bright enough, then the IR LED adjusts itself

to lower power; and if the scene is not bright enough, the IR LED adjusts itself to

higher power.

Select Manual, and you can manually set the value of distance between the IR camera

and object, to adjust the power of IR LED. Small distance value indicates the object is

near the IR camera, and the device adjusts the IR LED to lower power to avoid

overexposure; large distance value indicates the object is far away, and the device

adjusts the IR LED to higher power to avoid too dark image.

 Backlight Settings

BLC: If you focus on an object against strong backlight, the object will be too dark to

be seen clearly. BLC compensates light to the object in the front to make it clear. OFF,

Up, Down, Left, Right, Center and customize are selectable.

WDR: Wide Dynamic Range can be used when there is a high contrast of the bright

area and the dark area of the scene.

HLC: High Light Compression function can be used when there are strong lights in

the scene affecting the image quality.

 White Balance

White balance is the white rendition function of the camera used to adjust the color

temperature according to the environment.