User's Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Wi-Fi Settings
- Chapter 5 Live View
- Chapter 6 Network Camera Configuration
- Chapter 7 Network Settings- 7.1 Configuring Basic Settings
- 7.2 Configure Advanced Settings- 7.2.1 Configuring SNMP Settings
- 7.2.2 Configuring FTP Settings
- 7.2.3 Configuring Email Settings
- 7.2.4 Platform Access
- 7.2.5 Wireless Dial
- 7.2.6 HTTPS Settings
- 7.2.7 Configuring QoS Settings
- 7.2.8 Configuring 802.1X Settings
- 7.2.9 Integration Protocol
- 7.2.10 Bandwidth Adaptation
- 7.2.11 Network Service
- 7.2.12 Smooth Streaming
 
 
- Chapter 8 Video/Audio Settings
- Chapter 9 Image Settings
- Chapter 10 Event Settings- 10.1 Basic Events
- 10.2 Smart Events- 10.2.1 Configuring Audio Exception Detection
- 10.2.2 Configuring Defocus Detection
- 10.2.3 Configuring Scene Change Detection
- 10.2.4 Configuring Face Detection
- 10.2.5 Configuring Intrusion Detection
- 10.2.6 Configuring Line Crossing Detection
- 10.2.7 Configuring Region Entrance Detection
- 10.2.8 Configuring Region Exiting Detection
- 10.2.9 Configuring Unattended Baggage Detection
- 10.2.10 Configuring Object Removal Detection
 
- 10.3 VCA Configuration
 
- Chapter 11 Storage Settings
- Chapter 12 Playback
- Chapter 13 Picture
- Chapter 14 Application
- Appendix
Network Camera User Manual 
64 
2.  Modify the User Name, Level and Password. 
STRONG  PASSWORD  RECOMMENDED–We  highly  recommend  you 
create  a  strong  password  of  your  own  choosing  (using  a  minimum  of  8 
characters,  including  at  least  three  of  the  following  categories:  upper  case 
letters,  lower  case  letters,  numbers,  and  special  characters)  in  order  to 
increase  the  security  of  your  product.  And  we  recommend  you  reset  your 
password  regularly,  especially  in  the  high  security  system,  resetting  the 
password monthly or weekly can better protect your product. 
3.  You can check or uncheck the permissions. 
4.  Click OK to finish the user modification. 
  Deleting a User 
Steps: 
1.  Click to select the user you want to delete and click Delete. 
2.  Click OK on the pop-up dialogue box to confirm the deletion. 
  Setting Simultaneous Login 
Steps: 
1.  Click General. 
2.  Slide the slide  bar  to  set the simultaneous  login.  If  the  number of the  illegal 
login attempts exceeds the set threshold, your access will be denied. 
  As Operator or User 
Operator or user can modify password. Old password is required for this action. 
  Security Question 
Purpose:   
Security question is used to recover the admin password when admin user forgets the 
password.  Recovering  the password  via the security questions and  via  the email are 










