User's Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Wi-Fi Settings
- Chapter 5 Live View
- Chapter 6 Network Camera Configuration
- Chapter 7 Network Settings- 7.1 Configuring Basic Settings
- 7.2 Configure Advanced Settings- 7.2.1 Configuring SNMP Settings
- 7.2.2 Configuring FTP Settings
- 7.2.3 Configuring Email Settings
- 7.2.4 Platform Access
- 7.2.5 Wireless Dial
- 7.2.6 HTTPS Settings
- 7.2.7 Configuring QoS Settings
- 7.2.8 Configuring 802.1X Settings
- 7.2.9 Integration Protocol
- 7.2.10 Bandwidth Adaptation
- 7.2.11 Network Service
- 7.2.12 Smooth Streaming
 
 
- Chapter 8 Video/Audio Settings
- Chapter 9 Image Settings
- Chapter 10 Event Settings- 10.1 Basic Events
- 10.2 Smart Events- 10.2.1 Configuring Audio Exception Detection
- 10.2.2 Configuring Defocus Detection
- 10.2.3 Configuring Scene Change Detection
- 10.2.4 Configuring Face Detection
- 10.2.5 Configuring Intrusion Detection
- 10.2.6 Configuring Line Crossing Detection
- 10.2.7 Configuring Region Entrance Detection
- 10.2.8 Configuring Region Exiting Detection
- 10.2.9 Configuring Unattended Baggage Detection
- 10.2.10 Configuring Object Removal Detection
 
- 10.3 VCA Configuration
 
- Chapter 11 Storage Settings
- Chapter 12 Playback
- Chapter 13 Picture
- Chapter 14 Application
- Appendix
Network Camera User Manual 
29 
 WEP Mode 
  Authentication - Select Open or Shared Key System Authentication, depending on 
the  method used by  your access point.  Not  all  access points  have this  option,  in 
which case they probably use Open System, which  is sometimes known as SSID 
Authentication.   
  Key length - This sets the length of the key used for the wireless encryption, 64 or 
128  bit.  The  encryption  key  length  can  sometimes  be  shown  as  40/64  and 
104/128. 
  Key  type  -  The  key  types  available  depend  on the  access  point  being  used.  The 
following options are available: 
HEX - Allows you to manually enter the hex key. 
ASCII - In this method the string must be exactly 5 characters for 64-bit WEP and 
13 characters for 128-bit WEP. 
WPA-personal and WPA2-personal Mode:   
Enter the required Pre-shared Key  for the  access point, which can be a hexadecimal 
number or a passphrase. 
 Security Mode- WPA-personal 
WPA- enterprise and WPA2-enterprise Mode:   










