User Manual

User Manual of Network Camera
4
Cautions:
 Make sure the power supply voltage is correct before using the product.
 Do not drop the product or subject it to physical shock. Do not install the product
on vibratory surface or places.
 Do not expose it to high electromagnetic radiating environment.
 Do not aim the lens at the strong light such as sun or incandescent lamp. The
strong light can cause fatal damage to the product.
 The sensor may be burned out by a laser beam, so when any laser equipment is
being used, make sure that the surface of the sensor not be exposed to the laser
beam.
 Do not place the product in extremely hot, cold temperatures (the operating
temperature should be between -30°C ~ 65°C ), dusty or damp environment.
 To avoid heat accumulation, good ventilation is required for a proper operating
environment.
 While shipping, the product should be packed in its original packing.
 Please use the provided glove when open up the product cover. Do not touch the
product cover with fingers directly, because the acidic sweat of the fingers may
erode the surface coating of the product cover.
 Please use a soft and dry cloth when clean inside and outside surfaces of the
product cover. Do not use alkaline detergents.
 Improper use or replacement of the battery may result in hazard of explosion.
Please use the manufacturer recommended battery type.