User Manual

User Manual of Network Camera
25
Figure 5-2 Time Settings
 Select the Time Zone.
Select the Time Zone which is the closest to the location of the camera from the
drop-down menu.
 Synchronizing Time by NTP Server.
(1) Check the checkbox to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.
Figure 5-3 Time Sync by NTP Server
If the camera is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the camera is set in a customized network, NTP software can be used to
establish a NTP server for time synchronization.
 Synchronizing Time Synchronization Manually
Enable the Manual Time Sync function and then click to set the system time
from the pop-up calendar.
You can also check the Sync with computer time checkbox to synchronize the time of the
camera with that of your computer.