User Manual

User Manual of Network Camera
24
MULTICAST: It’s recommended to select MCAST type when using the
Multicast function. For detailed information about Multicast, refer to Section
5.3.1 TCP/IP Settings.
 Live View Performance: Set the live view performance to Least Delay,
Balanced or Best Fluency.
 Record File Settings: Set the saving path of the recorded video files. Valid for the
record files you recorded with the web browser.
 Record File Size: Select the packed size of the manually recorded and
downloaded video files to 256M, 512M or 1G. After the selection, the
maximum record file size is the value you selected.
 Save record files to: Set the saving path for the manually recorded video files.
 Save downloaded files to: Set the saving path for the downloaded video files
in playback mode.
 Picture and Clip Settings: Set the saving paths of the captured pictures and
clipped video files. Valid for the pictures you captured with the web browser.
 Save snapshots in live view to: Set the saving path of the manually captured
pictures in live view mode.
 Save snapshots when playback to: Set the saving path of the captured
pictures in playback mode.
 Save clips to: Set the saving path of the clipped video files in playback mode.
You can click to change the directory for saving the clips and pictures.
3. Click to save the settings.
5.2 Configuring Time Settings
Purpose:
You can follow the instructions in this section to configure the time synchronization
and DST settings.
Steps:
1. Enter the Time Settings interface:
Configuration > Basic Configuration > System > Time Settings
Or Configuration > Advanced Configuration > System > Time Settings