User Manual

User Manual of Network Camera
20
4.3 Recording and Capturing Pictures Manually
In the live view interface, click on the toolbar to capture the live pictures or click
to record the live video. The saving paths of the captured pictures and clips can
be set on the Configuration > Local Configuration page. To configure remote
scheduled recording, please refer to Section 6.2.
The captured image will be saved as a JPEG file in your computer.
4.4 Operating PTZ Control
Purpose:
In the live view interface, you can use the PTZ control buttons to realize
pan/tilt/zoom control of the camera.
Before you start:
To realize PTZ control, the camera connected to the network must support the PTZ
function or a pan/tilt unit has been installed to the camera. Please properly set the
PTZ parameters on RS-485 Settings page referring to Section 10.6 RS-485 Settings.
4.4.1 PTZ Control Panel
On the live view page, click to show the PTZ control panel or click to
hide it.
Click the direction buttons to control the pan/tilt movements.
Figure 4-3 PTZ Control Panel
Click the zoom/iris/focus buttons to realize lens control.