User Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Live View
- Chapter 5 Network Camera Configuration
- Chapter 6 Storage Settings
- Chapter 7 Playback
- Chapter 8 Log Searching
- Chapter 9 Others
- Appendix
User Manual of Network Camera
9
Figure 2-2 Connecting via a Switch or a Router
2.1.2 Detecting and Changing the IP Address
You need the IP address to visit the network camera.
Steps:
1. To get the IP address, you can install the iVMS-4200 client software to list the
online devices. Please refer to the user manual of iVMS-4200 client software for
detailed information.
2. Change the IP address and subnet mask to the same subnet as that of your
computer.
3. Enter the IP address of network camera in the address field of the web browser
to view the live video.
The default IP address is 192.0.0.64 and the port number is 8000. The default user name
is admin, and password is 12345.
For accessing the network camera from different subnets, please set the gateway for the
network camera after you logged in. For detailed information, please refer to Section
5.3.1 Configuring TCP/IP Settings.