DS-2CD2083G0-I-4mm-Quick-Strat-Guide

Network Bullet Camera·Quick Start Guide
22
1). Loosen the adjusting nut.
2). Adjust the pan direction [0° to 360°].
3). Adjust the tilt direction [0° to 90°].
4). Rotate the camera [0° to 360°] to adjust the lens to the desired
surveillance angle.
5). Tighten the adjusting nut to complete the installation.
Installation of Network Cable Waterproof
Jacket (Optional)
Purpose:
If the camera is installed outdoor, you can use the waterproof
accessory for the network cable after the camera is secured on the
installation surface.
①
②
③
④
⑤
⑥ ⑦
Figure 2-6 Waterproof Accessory Components
Table 2-1 Components
No.
Components
1
Camera’s Network Interface Socket
2
O-Type Gasket