Quick Start Guide

HD-TVI Speed Dome·Quick Start Guide
26
3 Application and Operations
3.1 System Application
The device can be controlled through the back-end device or control software. The back-end device
includes control keyboard, DVR (Digital Video Recorder), etc., and the control software includes
client software. Here we take the connection of DVR as the example.
SYV
RS485 Cable
DVR
Speed Dome Monitor
Figure 3-1 System Application
 If both the speed dome and the DVR support the coaxial function, the RS-485 cable is not
necessary.
 The HD-TVI video output can only be connected to specific HD-TVI DVR.
3.2 Basic Operations
Make sure the speed dome is connected properly, and the following basic operations are
supported:
Panning and tilting:
Click the direction buttons to control the pan and tilt movement of the speed dome.
Zooming:
Click the ZOOM+ or ZOOM- button to control the zooming.
Focusing:
Click the FOCUS+ or FOCUS- button to adjust the focus.
Iris:
Click the IRIS+ or IRIS- buttons to adjust the iris.
Preset control:
The speed dome supports the preset function, and the configurable preset range varies according
to the control system. The system menu pops up after you call the preset 95.
The main menu interface is shown as follows: