Quick Start Guide

HD-TVI Speed Dome·Quick Start Guide
12
DIP Switch SW2-Protocol Settings
HIKVISION
ON
ON
OFF
KALATE
OFF
OFF
ON
VICON
ON
OFF
ON
MAN_BOSCH
OFF
ON
ON
MAN_AD
ON
ON
ON
 Video Output Settings
The No.6, No.7 SW2 switches are for setting the video output mode of the speed dome. You can
refer to Table 1-23 for setting the video output.
Table 1-23 Set Video Output
Switch No.
Description
6
7
TVI
OFF
OFF
AHD
ON
OFF
CVI
OFF
ON
CVBS
ON
ON
 Terminal Resistor Settings
The No. 8 SW2 switch is for turning on/off the 120 Ω terminal resistor. You can refer to Table 1-24
for setting the terminal resistor.
Table 1-24 Set Terminal Resistor
Switch No.
Description
8
Turn on the resistor
ON
Turn off the resistor
OFF
1.3 Wiring and Installation
There are several ways to install the speed dome. Here we take wall mounting as the example.
1.3.1 Wiring
Check the installation environment and cables before wiring.
 Get familiar with the installation environment before wiring, including the wiring distance,