Quick Start Guide

HD-TVI Speed Dome·Quick Start Guide
10
Table 1-18 Set Terminal Resistor
Switch No.
Description
10
Turn on the resistor
ON
Turn off the resistor
OFF
1.2.4 7-inch IR Speed Dome Settings
Two DIP switches, SW1 and SW2, are for setting the speed dome address, baudrate, protocol, video
output mode, and terminal resistor, with value OFF=0. The DIP switch of the speed dome is shown
as Figure 1-10.
SW1 SW2
DIP Switch
Figure 1-10 Label of DIP Switch for IR Speed Dome
ON
1 2 3 4 5 6 7 8
SW2
ON
1 2 3 4 5 6 7 8
SW1
Figure 1-11 Enlarged View of DIP Switch
The default address is 0, the default baudrate is 2400, and the default terminal resister is OFF.
Table 1-19 Switch Functions
Switch No.
Function
1 to 8 (SW1)
Set the address for the speed dome
1 to 2 (SW2)
Set the baudrate for the speed dome
3 to 5 (SW2)
Set the protocol for the speed dome
6 to 7 (SW2)
Set the video output mode for the speed dome
8 (SW2)
Set the terminal resistor for the speed dome