Quick Start Guide

HD-TVI Speed Dome·Quick Start Guide
4
The speed dome is self-adaptive to private protocol when the No.8 switch is OFF.
 Video Output Settings
The No.10 DIP switch is for setting the video output mode of the speed dome. You can refer to
Table 1-6 for setting the video output.
Table 1-6 Set Video Output
Switch No.
Video Output
9
10
TVI
OFF
OFF
AHD
ON
OFF
CVI
OFF
ON
CVBS
ON
ON
 Terminal Resistor Settings
The two individual DIP switches, No.1 and No.2, are used for turning on/off the 120 Ω terminal
resistor. You can refer to Table 1-7 for setting the terminal resistor.
Table 1-7 Set Terminal Resistor
Switch No.
1
2
Turn on the Resistor
ON
ON
Turn off the Resistor
OFF
OFF
1.2.2 5-inch Speed Dome Settings
The DIP switch is used for setting the address, protocol, video output mode, and baudrate for the
speed dome, with value OFF=0. The 5-inch speed domes’ DIP switches are shown in Figure 1-4 and
Figure 1-5.
1 2 3 4 5 6 7 8
1
2
DIP Switch
Figure 1-4 DIP Switch for 5-inch Outdoor Speed Dome