Quick Start Guide

HD-TVI Speed Dome·Quick Start Guide
7
Table 1-12 Set Video Output
Switch No.
Video Output
1
2
TVI
OFF
OFF
AHD
ON
OFF
CVI
OFF
ON
CVBS
ON
ON
1.2.3 Mini IR & 5-inch IR Speed Dome Settings
The DIP switch is used for setting the speed dome address, baudrate, protocol, video output mode,
and terminal resistor, with value OFF=0.
DIP switch of mini IR speed dome is shown in figure1-7, and the DIP switch of 5-inch IR speed dome
is shown in figure1-8.
Screws
DIP Switch
Figure 1-7 DIP Switch of Mini IR Speed Dome
DIP
Switch
Figure 1-8 DIP Switch of 5-inch IR Speed Dome