User Manual

31
Special characters are not allowed to enter. The longest length is 32 characters long. If the name is
left empty, the current name of the device is remained.
 Type: The type of the added device. It is not editable when you add a device. The type of the device will be
shown after you add it successfully.
 Address: The IP address of the added device.
 Port: The port of the added device.
 User Name: Enter the user name of the added device.
 Password: Enter the password of the added device.
2. Click to confirm and finish the adding of device.
3. (Optional) You can click to cancel adding.
If the entered parameters are wrong, an exception window will pop up to remind you.
Task2: Auto-adding
Steps:
1. Click and hold down the Add Device icon for one second. The Auto Search window pops up as shown in
Figure 4.5. All the online devices under the same broadcast domain with the keyboard will be displayed in the
Auto Search window.
Figure 4.5 Auto Search Result
2. Click to select the added device. The device already added will be marked with .
3. Click to confirm the settings. And a pop-up box will show up to enter the user name and password of the
added device.
Figure 4.6 Auto Adding Device