User Manual

22
3) Select the security type as shown in Figure 3.9.
Figure 3.9 Selecting the Security Type
4) Enter the password to connect to the network.
If you open both the Ethernet and WLAN, the WLAN takes effect by default.
3.3 Language Settings
Purpose:
You can choose language for the device in this section.
Steps:
1. Click the Language button on the right of the General interface to enter the Language Configuration
interface.
2. Click the radio button to to select the Chinese or English language.
Figure 3.10 Language Configuration Interface
3.4 Date and Time Settings
Purpose:
You can set date and time and select time zone by configuring the parameters.