Data Sheet

DS-1273ZJ-130
Wall Mounting Bracket for Dome Camera
Features:
 Aluminum alloy material with surface spray
treatment
 Design with cable entry hole
 Better water proof design
 Convenient installation coordinating with cap
Dimension:
Order Model:
DS-1273ZJ-130
Parameter:
Model
Parameters
DS-1273ZJ-130
Wall Mounting Bracket for
Dome Camera
Appearance
Hikvision White
Range of
Application
Suitable for dome camera wall mounting
Material
Aluminum Alloy
Dimension
Φ132×183.5×228.5mm
Weight
690g
Notice:
 The bracket is for dome camera
 Pay attention to the color matching when select bracket
 The bracket should be installed on flat wall
 The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
 The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CD7X3PF(NF)-E(I)(Z),DS-2CD793PFWD-E(I)(Z)
DS-2CD793NFWD-E(I)(Z),DS-2CD7X4FWD-E(I)(Z)
DS-2CD7XXF-E(I)(Z),DS-2CD783F-EP
DS-2CD4112F-(I),DS-2CD4112FWD-(I)
DS-2CD4124F-(I),DS-2CD4132FWD-(I)
Installation Step:
① Choose the appropriate
wall to fix the bracket
and wire
② Fix cap to bracket and
complete wiring
③ Screw up and fix the cap
④ Take adaptor from the
case of dome camera
A: Cable entry hole
B: Fastening screw
C: Bayonet of adaptor
⑤ Check the hole site and
fix adaptor to cap
⑥ Connect the cable and fix
dome camera to cap
⑦ Rotate the dome camera
moderately and screw up the
fastening screw
⑧ Installation complete
D: Fastening screw on dome
Note: The actual bracket may vary from the picture above.
φ132
4-φ8.5
6-M4深8
83.5
46
83.5
158
85.7
228.5
120
183.5
Unit：mm