User Manual
Table Of Contents
- Chapter1 Introduction
- Chapter2 Keyboard Configuration
- Chapter3 Keyboard Operation
- Appendix 1: Specifications
- Appendix 2: FTP Upgrade
User Manual of DS-1100KI Network Keyboard
9
If the upgrading is failed, the corresponding error
message box will pop up.
Note: When the upgrading is successful, the keyboard
will restart automatically to complete the upgrade.
2.2 Device Management
Click Device on the admin main interface to enter the
device management menu.
2.2.1 Add Device
Auto Search: Click Auto Search button at the upper left
corner to enter the “Device-Auto Search” interface.
Select the start IP and end IP of the device to be
searched, and then click Search to start searching. After
the searching is completed, all devices searched out
and their information will be displayed in the list below.
Select the device from the list, input its user name and
password, and then click Add to add it to the system.
Note: Only the device that is in the same network area
with the keyboard can be searched out by the
keyboard.
Status: In the status bar, the icon
indicates the
device is not added,
indicates the device is failed
to be added, and the
indicates the device is
successfully added.