Quick Start Guide

Digital Signage Quick Start Guide
12
Step 3 Select Adding Mode.
Figure 4-4 Add Terminal by Serial No.
Step 4 Enter Terminal Name, Terminal Serial No. and Description. Description is optional.
Step 5 Click OK.
Step 6 Register the computer where information release client to terminal.
1) Enter information release software in terminal.
2) Click on the sidebar.
3) Enter the information of the computer and information release client on the server
configuration interface.
4) Click Save.
4.2.2 Register on the Terminal
The way of activation on the terminal is the same in two scenes. To activate on the terminal, refer
to 4.1.2 Register on the Terminal.