Quick Start Guide

Digital Signage Quick Start Guide
11
Step 5 Set IP type, IP address, and server port.
Step 6 Enter terminal password.
Step 7 Click OK.
Step 8 Optionally, click Acquire Registration Status to view terminal registration status.
Register Terminals by IP Address
Step 1 Go to Terminal Management.
Step 2 Click Add Terminal.
Figure 4-3 Add Terminal
Step 3 Select Adding Mode as Add by IP.
Step 4 Enter Terminal IP Address and Port.
Step 5 Enter Terminal Name and Terminal Password.
Step 6 Click OK.
Register Terminals by Serial No.
Before you start
1. Enter information release software in your terminal.
2. Click on the sidebar to obtain terminal serial No.
Step 1 Click Terminal Management.
Step 2 Click Add Terminal.