Quick Start Guide

Digital Signage Quick Start Guide
10
Step 6 Set server parameters.
Table 4-1 Server Parameters
Parameter
Description
Example
Device name
User defined
Device 1
IP address
Server IP
10.11.5.224
Port
Server Port
8000
Username
Server username
admin
Password
Server password
Qaz1234
Step 7 Click Save.
4.2 Register Terminals for Scene Two
4.2.1 Register on the Client
Register Terminals in the Same Network Segment
Before you start:
The terminal and the client are in the same network segment.
Step 1 Go to Terminal Management.
Step 2 Click on the lower-right corner.
Step 3 Select the terminals to register.
Step 4 Click CMS Registration.
Figure 3-2 CMS Registration