Quick Start Guide

Digital Signage Quick Start Guide
9
Figure 4-2 CMS Register
Step 4 Enter server information, including Server IP Address, Server Port, server User Name, and
Server Password.
The server port is 7660 by default. You can change the server port as needed.
Step 5 Enter a custom Terminal Name.
Step 6 Enter the Terminal Password.
Step 7 Click OK.
Step 8 Optionally, click and enter Terminal Password to check registration status.
4.1.2 Register on the Terminal
You can register your terminals on themselves.
If your terminal is touchscreen, you can operate the terminal with your figure and skip Step 1.
Step 1 Attach a mouse.
Step 2 Click on the side of the screen.
Step 3 Enter screen-saving password.
Step 4 Click Confirm.
Step 5 Click on the sidebar.