Quick Start Guide

ManualsBrandsHIKVISION ManualsDigital SignageDigital Signage

Table Of Contents

Chapter 1 Product Introduction
Chapter 2 Typical Application
Chapter 3 Activation
- 3.1 Activation for Scene One
- 3.2 Activation for Scene Two
  - 3.2.1 Activate on the Client
  - 3.2.2 Activate on the Terminal
Chapter 4 Registration
- 4.1 Register Terminals for Scene One
  - 4.1.1 Register on the Client
  - 4.1.2 Register on the Terminal
- 4.2 Register Terminals for Scene Two
  - 4.2.1 Register on the Client
  - 4.2.2 Register on the Terminal
Chapter 5 Terminal Software
Chapter 6 Remote Control Operations
- 6.1 Remote Control One
  - 6.1.1 Functions of Remote Control Keys
  - 6.1.2 Operation of Remote Control
- 6.2 Remote Control Two

Digital Signage Quick Start Guide

7

Figure 3-6 Activate Terminal

Step 5 Set the terminal password and confirm password.

Step 6 Click OK.

3.2.2 Activate on the Terminal

The way of activation on the terminal is the same in two scenes. To activate on the terminal, refer

to 3.1.2 Activate on the Terminal.