User's Manual

5
2.3 Wiring and Start Device
Steps:
1. (Optional) Connect TVI camera to the dashboard
camera’s TVI interface according to needs.
2. Connect the dashboard camera’s power cable to
the vehicle’s battery:
a. Connect ACC with vehicle’s ACC;
b. Connect VCC with vehicle battery’s positive pole；
c. Connect GND with vehicle battery’s negative pole.
3. The dashboard camera starts automatically once the
vehicle started. Check the recording indicator.
If recording indicator is bright and steady, the camera is
started normally.
 Dashboard camera starts recording automatically after
powered on.
 Contact the dealer to obtain the APP to manage the
device.
3 Trouble Shooting
Trouble
Solution
Starting
dashcam
failed.
 Ensure the automobile’s
battery met the needs of the
camera.
 Ensure the power cable is
connected normally.
 Ensure the automobile
started normally and the
power supply is normal.
Recording
failed.
 Ensure TF card is installed.
(8G, Class 10 or above)
 Check TF card status, e.g., its
format and lifespan. If it is
not well, replace it with a
good one.
Recorded
videos are
fuzzy.
 Tear off the proof film on lens.
 Clean the lens and glass.