Quick Start Guide

Network PTZ Camera·Quick Start Guide
23
Figure 2-33 Secure the Mounting Base
Note:
Water-proof treatment is required for cable connectors. Refer to
section 2.9 and 2.10 for details.
2.4.2 Ceiling Mounting
Purpose:
There are two ceiling mounting types provided for the camera, and
we take the mounting without the junction box as the example.
Notes:
 The ceiling mounting is applicable to the indoor/outdoor solid
ceiling construction. The followings are the mandatory
precondition for ceiling mounting:
 The thickness of the ceiling shall range from 5 mm to 40 mm.
 Make sure the ceiling is strong enough to withstand more than
four times the weight of the PTZ camera and its accessories.
Wiring
The cables of PTZ camera can be routed either from the top or the
side of the back box, as shown in Figure 2-34 and Figure 2-35.