User manual

User Manual of Network Speed Dome

 Sodium Lamp

You can select this mode when there are sodium lamps installed near the speed

dome.

 Auto-Track

In Auto-Track mode, white balance is continuously being adjusted in real-time

according to the color temperature of the scene illumination.

Note: This function varies depending on the models of speed dome.

3D Digital Noise Reduction

You can enable or disable the 3D Digital Noise Reduction function as shown in Figure

6-35. The level ranges from 0 to 100.

Figure 6-35 3D Digital Noise Reduction

Note: This function varies depending on the models of speed dome.

De-fog Mode

When there is fog in the image, you can enable this function to get clear image.

Zoom Limit

You can set Zoom Limit value to limit the maximum value of zooming. The value can

be set to 20, 40, 80, 160 and 320.

Note: This function varies depending on the models of speed dome.

IR Light Mode

IR light mode can be set to Auto and Manual.

 Auto: The brightness of the infrared light will be adjusted automatically. IR Light

Sensitivity value ranges from 0 to 100.

 Manual: you need to adjust the brightness value of infrared light manually. IR

Light Bright value ranges from 0 to 100.

Note: For detailed parameters configuration of IR light, you can enter the OSD menu

by calling the special preset 95.

Chroma Suppress

The Chroma Suppress level ranges from 0 to 100 as shown in Figure 6-36.