User manual

User Manual of Network Speed Dome

Figure 6-45 Video Loss

2. Check the Enable Video Loss Detection checkbox to enable the video loss

detection.

3. Click to edit the arming schedule for video loss detection. The

arming schedule configuration is the same as the setting of the arming schedule for

motion detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in

Section 6.6.1.

4. Check the checkbox to select the linkage method taken for the video loss alarm.

Notify surveillance center, send email and trigger alarm output are selectable. Please

Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1.

5. Click to save the settings.

6.6.3 Configuring Tamper-proof Alarm

Purpose:

You can configure the speed dome to trigger the alarm actions when the lens is

covered.

Steps:

1. Enter the Tamper-proof Settings interface: