User manual

User Manual of Network Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
73
Figure 6-41 Enable Motion Detection
(3) Click . Click and drag the mouse on the live video image to draw
a motion detection area.
You can draw up to 8 motion detection areas on the same image.
(4) Click to finish drawing.
You can click to clear all of the areas.
(5) Move the slider to set the sensitivity of the
detection.
2. Set the Arming Schedule for Motion Detection.
Steps:
(1) To edit the arming schedule as shown in Figure 6-43, click in
Figure 6-42.